Shop

Bluestone Sealer

$65.00$768.00 ex GST

Rockstar Bluestone sealer has been formulated using the latest in stone sealing technology.

Penetrating sealer for bluestone and basalt that doesn’t alter the appearance of the stone. It offers high stain resistance to water and oil based contaminants.

 UN 1993

Clear
SKU: N/A Category:

Description

Rockstar BLUESTONE SEALER is a low viscosity sealer that is specifically formulated for use on basaltic bluestone.

USES

Application of BLUESTONE SEALER onto basaltic bluestone pavers enhances the stain resistance of the bluestone surface without changing the colour or texture of the stone. Rockstar BLUESTONE SEALER is ideal for Australian and Chinese sourced stone.

BENEFITS

  • Excellent oil and water repellency, and stain resistance
  • Does not change the look of the stone
  • Does not inhibit the water-vapour permeability
  • Ready to apply, no dilution required
  • Rapid curing
  • Cannot flake or peel

PROPERTIES

Appearance and colour………………………………….Colourless to yellowish, clear to hazy liquid

Specific Gravity (Water = 1) …………………………..0.83 g/ml

Boiling Point ………………………………………………..120 – 200o C

Solubility in Water ………………………………………..Not miscible

Flash Point ………………………………………………….30o C

APPLICATION INSTRUCTIONS

  1. Always apply first to an inconspicuous area or scrap piece of stone to ensure the suitability of this product for your stone.
  2. Ensure the surface to be sealed is free of excess grout and is dry and free of any oils and other surface contaminants.
  3. Apply BLUESTONE SEALER undiluted by lambswool applicator or low pressure hand sprayer. Ensure that the surface is fully saturated without leaving pools of material.
  4. Apply a second coat once the first coat has dried (2-4 hours).
  5. The product will cure in 12-24 hours depending on atmospheric conditions.

COVERAGE

Coverage is dependent on the permeability of the stone or tile and is in the range of 9-11 Mt2 per litre.

PRECAUTIONS

  1. Do not allow pools of liquid BLUESTONE SEALER to dry on the surface. Remove excess liquid with a clean, lint-free cloth.
  2. Avoid contact with skin and eyes by wearing suitable protective gloves and eyewear.
  3. Ensure that there are no sources of ignition in area.

CLEANING

Clean all equipment with mineral turpentine.

PACKAGING

BLUESTONE SEALER is available in 1, 5 and 20 litre packs.

STORAGE

Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children. Keep away from sources of heat, spark and ignition, product is flammable.

DISCLAIMER

The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.

Additional information

Size

1L, 5L, 20L

Technical Data Sheets

Please access the product information sheet and Material Safety Data Sheet (MSDS) below:

Download Bluestone Sealer Fact Sheet

Rockstar Warranty Sheet

Bluestone Sealer Material Safety Data Sheet

Reviews

There are no reviews yet.

Be the first to review “Bluestone Sealer”

Your email address will not be published. Required fields are marked *