Shop

Paver Seal

$33.60$204.75 ex GST

Rockstar Paver Seal is a solvent based acrylic sealer formulated for sealing concrete pavers, patterned concrete and concrete flooring. It gives a wet look and is UV Stable and non-yellowing. Suits concrete pavers, pattern concrete, terracotta and concrete flooring.

 UN 1886

Clear
SKU: N/A Category:

Description

Rockstar PAVER SEAL is a clear, UV stable, solvent-based acrylic sealer for interior or exterior stone, tile, slate, concrete and brick flooring surfaces.

USES

PAVER SEAL is a long lasting sealer that protects stone, tile, slate, concrete and brick flooring surfaces from oil and grease stains. It can also be used to dust proof concrete. The level of gloss can be controlled by the number of coats applied.

BENEFITS

• UV stable, can be used outdoors • Provides a total barrier to oil and grease entering the floor • Imparts a glossy “wet look” • Can be easily recoated

PROPERTIES

Appearance and colour………………………………….Colourless liquid with petroleum odour

Specific Gravity (Water = 1) …………………………..0.93 g/ml

Boiling Point ………………………………………………..155 – 175o C

Solubility in Water ………………………………………..Not miscible

Flash Point ………………………………………………….30o C

APPLICATION INSTRUCTIONS

  1. Always apply first to an inconspicuous area or scrap piece of flooring to ensure the suitability of this product for your flooring surface.
  2. Ensure the surface to be coated is clean, dry and free of any oils and other surface contaminants.
  3. Apply a first thin coat of PAVER SEAL by brush or roller. Do not allow sealer to pool and do not apply as a thick coat as blistering of the coating may occur.
  4. Allow the first coat to dry (4-12 hours depending on atmospheric conditions).
  5. Apply a second thin coat.
  6. If required apply a third coat once the second coat is dry.

COVERAGE

Coverage is dependent on the permeability of the surface being coated and is in the range of 8-10 Mt2 per litre per coat

PRECAUTIONS

  1. Avoid contact with skin and eyes by wearing suitable protective gloves and eyewear.
  2. Ensure that there are no sources of ignition in area.

CLEANING

Clean all equipment with Xylene

PACKAGING

PAVER SEAL is available in 1, 5 and 20 litre packs.

STORAGE

Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children. Keep away from sources of heat, spark and ignition, product is flammable.

DISCLAIMER

The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.

Additional information

Size

1L, 5L, 20L

Technical Data Sheets

Please access the product information sheet and Material Safety Data Sheet (MSDS) below:

Paver Sealer Fact Sheet

Paving Sealer Material Safety Data Sheet

Reviews

There are no reviews yet.

Be the first to review “Paver Seal”

Your email address will not be published. Required fields are marked *