Shop

Porcelain Seal

$72.00$739.20 ex GST

Rockstar Porcelain Seal utilises the latest in nano technology to produce a high performance penetrating sealer specifically designed to seal porcelain tiles.

This product is a solvent-based penetrating sealer which does not alter the appearance of the stone. It provides stain resistance to common household contaminants. and protects against water, salt damage and graffiti. suitable for porcelain tiles, vitrified tiles and dense stone surfaces.

 UN 1993

Clear
SKU: N/A Category:

Description

Rockstar PORCELAIN SEAL helps to protect porcelain surfaces from staining due to common staining substances.

USES

Application of PORCELAIN SEAL on fully vitrified porcelain surfaces such as fully vitrified porcelain tiles and porcelain bathroom fittings dramatically reduces the adhesion and penetration of both water-based and oil-based staining substances. The surfaces become much easier to clean.

BENEFITS

  • Does not change the surface appearance
  • Excellent oil and water repellency
  • Stains become easier to remove
  • Ready to apply, no dilution required
  • Rapid curing
  • Cannot flake or peel

PROPERTIES

Appearance and colour………………………………….Colourless to yellowish, clear to hazy liquid

Specific Gravity (Water = 1) …………………………..0.81 g/ml

Boiling Point ………………………………………………..120 – 200o C

Solubility in Water ………………………………………..Not miscible

Flash Point ………………………………………………….30o C

APPLICATION INSTRUCTIONS

  1. Always apply first to an inconspicuous area or scrap piece of tile to ensure the suitability of this product for your surface.
  2. Ensure the surface to be sealed is dry and free of any oils and other surface contaminants. If in doubt cleanse thoroughly with Rockstar Neutral Cleaner, rinse with water and allow to dry.
  3. Apply PORCELAIN SEAL undiluted using a lambswool applicator or low pressure hand sprayer. Ensure that the surface is fully saturated without leaving pools of material. Apply a second coat as soon as the first coat has dried (1-2 hours).
  4. The product will cure in 12-24 hours depending on atmospheric conditions.

COVERAGE

Coverage is dependent on the permeability of the stone or tile and is in the range of 10-14 Mt2 per litre.

PRECAUTIONS

  1. Do not allow pools of liquid PORCELAIN SEAL to dry on the surface. Remove any excess material with a lint-free cloth.
  2. Avoid contact with skin and eyes by wearing suitable protective gloves and eyewear.
  3. Ensure that there are no sources of ignition in area.

CLEANING

Clean all equipment with mineral turpentine.

PACKAGING

PORCELAIN SEAL is available in 1, 5 and 20 litre packs.

STORAGE

Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children. Keep away from sources of heat, spark and ignition, product is flammable.

DISCLAIMER

The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.

Additional information

Size

1L, 5L, 20L

Technical Data Sheets

Please access the product information sheet and Material Safety Data Sheet (MSDS) below:

Porcelain Seal Material Safety Data Sheet

Porcelain Seal Product Fact Sheet

Reviews

There are no reviews yet.

Be the first to review “Porcelain Seal”

Your email address will not be published. Required fields are marked *