Shop

Solvent Based Stripper

$30.45$176.00 ex GST

Rockstar Solvent based stripper is a stripper formulated to quickly penetrate and remove urethanes,solvent based acrylic coatings, paint, epoxy residue and adhesives. It can be used on natural stone and hard surfaces.

  • Removes Solvent based acrylic coatings,urethanes,paint,epoxy residue and adhesives
  • Strips synthetic waxes on polished porcelain
  • Penetrates quickly to soften coatings
  • Apply to natural stone, concrete, slate, terracotta and porcelain

  UN 1307

Clear
SKU: N/A Categories: ,

Description

DESCRIPTION

Rockstar SOLVENT BASED STRIPPER is a low viscosity liquid that softens and dissolves old floor coatings.

USES

SOLVENT BASED STRIPPER quickly softens and solubilises a wide variety of coatings including urethanes, solvent and water-based acrylics, waxes and epoxies. It is ideal for removing paint residues and adhesives from most hard surfaces such as stone, concrete, terracotta, terrazzo, tiles and timber. This product should not be used on plastic surfaces such as vinyl, powdercoated surfaces and Plexiglass.

BENEFITS

  • Penetrates quickly to soften most coatings
  • Strips synthetic waxes on porcelain surfaces
  • Can be used on most hard, non-plastic surfaces.

PROPERTIES

  • Appearance and colour………………………………….Clear liquid with hydrocarbon odour
  • Specific Gravity (Water = 1) …………………………..0.87 g/ml
  • Boiling Point ………………………………………………..136 – 145o C
  • Solubility in Water ………………………………………..Not miscible
  • Flash Point ………………………………………………….22 -27o C

APPLICATION INSTRUCTIONS

  1. Always apply first to an inconspicuous area to ensure the suitability of this product for your job.
  2. Ensure that any surface near the application area is adequately protected from unintentional splashes or spillages.
  3. Use only in well ventilated areas away from sources of ignition.
  4. The applicator is to use safety gloves, safety goggles and respirator during use.
  5. Carefully and slowly pour SOLVENT BASED STRIPPER onto the floor agitate with a stiff bristle broom or floor scrubber. Once the floor coating has been completely removed wash thoroughly with Rockstar NEUTRAL CLEANER.

COVERAGE

Coverage is dependent on the thickness and tenacity of the coating to be removed, it is normally in the 4 – 6 Mt2 per litre.

PRECAUTIONS

  1. Use only in well ventilated areas away from sources of ignition.
  2. Avoid contact with skin and eyes by wearing safety gloves, safety goggles and respirator during use.

PACKAGING

SOLVENT BASED STRIPPER is available in 1, 5 and 20 litre packs.

STORAGE

Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children. Keep away from sources of heat, spark and ignition, product is flammable.

SAFETY

Classified as Hazardous according to criteria of Worksafe Australia. For further detailed information refer to Material Safety Data Sheet

DISCLAIMER

The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.

Additional information

Size

1L, 5L, 20L

Technical Data Sheets

Please access the product information sheet and Material Safety Data Sheet (MSDS) below:

Solvent Based Stripper Product Fact Sheet

Solvent Based Stripper Material Safety Data Sheet

Reviews

There are no reviews yet.

Be the first to review “Solvent Based Stripper”

Your email address will not be published. Required fields are marked *