Shop

Stone Shield

$68.20$598.00 ex GST

Rockstar Stone Shield is an organic solvent based hybrid sealer which means it penetrates the stone and leaves a thin film on the surface. Provides excellent gloss retention, superb wear resistance and excellent anti-slip properties. Rockstar Stone Shield penetrates and protects terrazzo, marble, ceramic tiles, terracotta, concrete and vitreous surfaces.

 UN 1263

Clear
SKU: N/A Category:

Description

Rockstar STONE SHIELD is a clear, UV stable, low-sheen acrylic co-polymer sealer for terrazzo and stone surfaces.

USES

STONE SHIELD is a long lasting and hard-wearing sealer that protects stone and terrazzo surfaces from oil, grease and other staining substances. Application of STONE SHIELD on coloured stones will impart an attractive low sheen finish and enhance the stone’s colour.

BENEFITS

  • Provides a total barrier to oil, grease and other staining substances entering the floor
  • UV stable, can be used outdoors
  • Xylene-free
  • Can be easily recoated

PROPERTIES

Appearance and colour………………………………….Colourless liquid with hydrocarbon odour

Specific Gravity (Water = 1) …………………………..0.87 g/ml

Boiling Point ………………………………………………..130 – 180o C

Solubility in Water ………………………………………..Not miscible

Flash Point ………………………………………………….18o C

APPLICATION INSTRUCTIONS

  1. Always apply first to an inconspicuous area or scrap piece of flooring to ensure the suitability of this product for your flooring surface.
  2. Ensure the surface to be coated is clean, dry and free of any oils and other surface contaminants.
  3. Apply a first thin coat of STONE SHIELD by brush or roller. Do not allow sealer to pool and do not apply as a thick coat as blistering of the coating may occur.
  4. Allow the first coat to dry (4-12 hours depending on atmospheric conditions).
  5. Apply a second thin coat.
  6. If required apply a third coat once the second coat is dry.

COVERAGE

Coverage is dependent on the permeability of the surface being coated and is in the range of 8.5-11 Mt2 per litre per coat

PRECAUTIONS

  1. Avoid contact with skin and eyes by wearing suitable protective gloves and eyewear.
  2. Ensure that there are no sources of ignition in area.

CLEANING

Clean all equipment with mineral turpentine

PACKAGING

STONE SHIELD is available in 1, 5 and 20 litre packs.

STORAGE

Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children. Keep away from sources of heat, spark and ignition, product is flammable.

SAFETY

Classified as Hazardous according to criteria of Worksafe Australia. For further detailed information refer to Material Safety Data Sheet.

Rockstar Sealing Stone Shield Product Fact Sheet

Stone Shield Material Safety Data Sheet

DISCLAIMER

The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.

Additional information

Size

1L, 5L, 20L

Technical Data Sheets

Please access the product information sheet and Material Safety Data Sheet (MSDS) below:

Rockstar Sealing Stone Shield Product Fact Sheet

Stone Shield Material Safety Data Sheet

Reviews

There are no reviews yet.

Be the first to review “Stone Shield”

Your email address will not be published. Required fields are marked *