Shop

Water Based Stripper

$55.64$317.42 ex GST

Rockstar Water based Stripper is a multi-purpose stripper formulated to remove water based acrylic coatings and polishes from stone surfaces.

  • Removes water based acrylic coatings
  • Strips acrylic waxes on polished porcelain
  • Penetrates quickly to soften coatings
  • Apply to natural stone, concrete, terracotta and porcelain

  UN 2491

 

Clear
SKU: N/A Categories: ,

Description

DESCRIPTION

Rockstar WATER BASED STRIPPER is a stripping solution that easily removes polishes from floor surfaces.

USES

  • WATER BASED STRIPPER is formulated to remove water-based crosslinked acrylic coatings and polishes from natural stone, concrete, terracotta and porcelain with a minimum of effort.
  • Quickly softens and emulsifies old, worn or discoloured finishes
  • Easily cuts through highly built-up or heavily burnished finishes.
  • Water-based formulation

PROPERTIES

Appearance and colour………………………………….Colourless to slightly yellow liquid with amine odour

pH ……………………………………………………………..11.5-12.5

Specific Gravity (Water = 1) …………………………..0.97 g/ml

Boiling Point ………………………………………………..100o C

Solubility in Water ………………………………………..Miscible

Flash Point ………………………………………………….67o C

TECHNICAL DATA SHEETS

 

APPLICATION INSTRUCTIONS

  1. Always apply first to an inconspicuous area to ensure the suitability of this product for your floor.
  2. Dilute WATER BASED STRIPPER 1:4 with hot water and apply liberally to the floor area with a mop. Work in small manageable sized areas.
  3. Allow the solution to remain on the floor a minimum of 10 minutes to soften and emulsify the coating.
  4. Agitate the floor area with a floor scrubber or a stiff bristle broom to dislodge and solubilise the old coating.
  5. Pick up the residue. If required, repeat the application process until all traces of coating is removed.
  6. Once all old coating has been removed, rinse the floor area with Rockstar NEUTRAL CLEANER.

PRECAUTIONS

  1. This solution is corrosive; avoid contact with skin and eyes by wearing suitable protective gloves and eyewear.
  2. Use in a well ventilated area.

PACKAGING

WATER BASED STRIPPER is available in 1, 5 and 20 litre packs.

STORAGE

Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children.

SAFETY

Classified as Hazardous according to criteria of Worksafe Australia. For further detailed information refer to Material Safety Data Sheet.

DISCLAIMER

The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.

Additional information

Size

1L, 5L, 20L

Technical Data Sheets

Please access the product information sheet and Material Safety Data Sheet (MSDS) below:

Water Based Stripper Product Fact Sheet

Water Based Stripper Material Safety Data Sheet (MSDS)

Reviews

There are no reviews yet.

Be the first to review “Water Based Stripper”

Your email address will not be published. Required fields are marked *