Shop

Stone Enhancer

$65.10$768.00 ex GST

Rockstar Stone Enhancer is a penetrating sealer used to enrich the colour of worn, faded or damaged stone. Rockstar Stone Enhancer is very popular in the polished concrete community and used frequently by customers who wish to enhance their basalt/bluestone tiles.

Developed to enrich the colour of worn, faded or damaged stone, this is a penetrating and breathable sealer that is suitable for indoor and outdoor use. Repels stains and soiling for easier cleaning.

 UN 1993

Clear
SKU: N/A Category:

Description

Rockstar STONE ENHANCER is an easy to use solution that darkens and brings out the beauty of stone and tiles.

USES

STONE ENHANCER is used to permanently darken and enhance to colour of stone and tile surfaces. The surfaces also become highly resistant to the penetration of water.

BENEFITS

  • Long lasting and weather-resistant
  • Can even out colour inconsistencies
  • The surface becomes highly water repellent
  • Ready to apply, no dilution required

PROPERTIES

Appearance and colour………………………………….Colourless to yellowish, clear to hazy liquid

Specific Gravity (Water = 1) …………………………..0.85 g/ml

Boiling Point ………………………………………………..120 – 200o C

Solubility in Water ………………………………………..Not miscible

Flash Point ………………………………………………….31o C

APPLICATION INSTRUCTIONS

  1. Always apply first to an inconspicuous area or scrap piece of stone to ensure the suitability of this product for your stone or tile.
  2. Ensure the surface to be sealed is free of excess grout and grout haze, is dry and free of any oils and other surface contaminants.
  3. Apply STONE ENHANCER undiluted using a lambswool applicator or low pressure hand sprayer. Ensure that the surface is fully saturated without leaving pools of material. Remove excess material on the surface with a clean cloth.
  4. Apply a second coat 3-4 hours after the first coat.
  5. The product will dry in 6-8 hours, full cure develops after 7 days.

COVERAGE

Coverage is dependent on the permeability of the stone or tile and is in the range of 6-8 Mt2 per litre.

PRECAUTIONS

  1. Do not allow pools of liquid STONE ENHANCER to dry on the surface.
  2. Avoid contact with skin and eyes by wearing suitable protective gloves and eyewear.
  3. Ensure that there are no sources of ignition in area.

CLEANING

Clean all equipment with mineral turpentine.

PACKAGING

STONE ENHANCER is available in 1, 5 and 20 litre packs.

STORAGE

Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children. Keep away from sources of heat, spark and ignition, product is flammable.

DISCLAIMER

The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.

Additional information

Size

1L, 5L, 20L

Technical Data Sheets

Please access the product information sheet and Material Safety Data Sheet (MSDS) below:

Stone Enhancer Material Safety Data Sheet

Stone Enhancer product Fact Sheet

Reviews

There are no reviews yet.

Be the first to review “Stone Enhancer”

Your email address will not be published. Required fields are marked *