Description
ROCKSTAR GLOSS SLATE SEAL
Rockstar GLOSS SLATE SEAL is a clear, UV stable, solvent-based acrylic sealer. Rockstar GLOSS SLATE SEAL will apply a sacrificial coating on the surface leaving a glossy wet look finish. Ideal for use on Slate and Concrete floors.
USES
GLOSS SLATE SEAL is a durable surface sealer which protects, Slate and Concrete surfaces from oil and grease stains.
Can be used indoors and outdoors.
BENEFITS
• UV stable, Non yellowing and can be used outdoors
• Provides a barrier to oil and grease entering the floor
• Imparts a glossy “wet look”
• High solids formulation for long life
PROPERTIES
Appearance and colour: Colourless liquid with petroleum odour
Specific Gravity (Water = 1): 0.93 g/ml
Boiling Point: 155 – 175˚C
Solubility in Water: Not miscible
Flash Point: 30˚C
APPLICATION INSTRUCTIONS
- Ensure the surface to be coated is clean, dry and free of any oils and other surface contaminants.
- Apply an even coat of GLOSS SLATE SEAL by brush or First coat can be diluted by 25% with Thinners to provide a foundation for further coats
- Allow the first coat to dry (1-3 hours depending on atmospheric conditions).
- Apply a second even
- If required apply a third coat once the second coat is
COVERAGE
Coverage is dependent on the permeability of the surface being coated and is in the range of 6-10 Mt2 per Litre per coat.
PRECAUTIONS
Avoid contact with skin and eyes by wearing suitable protective gloves and eyewear. Wear a Breathing Mask, using solvent vapor filters.
CLEANING
Clean all equipment with Xylene.
PACKAGING
GLOSS SLATE SEAL is available in 1, 5, 20 Litre Containers
STORAGE
Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children.
Keep away from sources of heat, spark and ignition, product is flammable.
SAFETY
Classified as Hazardous according to criteria of Worksafe Australia.
For further detailed information refer to Material Safety Data Sheet.
DISCLAIMER
The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.
