Description
USES
Rockstar STONE CARE CONCENTRATE primary use is to re-fill Stone Care Spray bottles.
Refilled Stone Care Spray can be used to clean all Natural stone – Marble, Travertine, Granite, Limestone, Onyx and Terrazzo.
Rockstar Stone Care Spray can be used on all Natural Stone Surfaces. For example Counter Tops, Vanities, Tables and all Stone surfaces.
BENEFITS
- Use the Stone Care Concentrate to refill your spray bottle
- Environmentally friendly with reusable spray bottle
- Instantly cuts through grease smears
- Provides added sealant protection
PROPERTIES
Appearance and colour………………………………..clear non-viscous liquid
pH ………………………………………………………………….7 – 7.5
Specific Gravity (water = 1) ……………………….1.01 – 1.03 g/ml
Boiling Point ……………………………………………….100°C
Solubility in Water ……………………………………….Miscible
Flash Point ………………………………………………….Non Flammable
DILUTION INSTRUCTIONS
Refill Spray bottle and dilute concentrate with clean water at a ratio of 1:9.
Use 5 capfuls per spray bottle / 2.5 fluid oz or 75ml of concentrate per bottle.
1 Gallon makes up 10 gallons of Stone Care Spray / 1 litre makes up 10 litres of Stone Care Spray.
PACKAGING
Rockstar STONE CARE CONCENTRATE is available in 1 and 5 Litre Containers / 1 Quart / 1.32 Gal.
STORAGE
Keep the container tightly closed when not in use.
SAFETY
Classified as Non-Hazardous according to criteria of Worksafe Australia. For further detailed information refer to the Safety Data Sheet.
DISCLAIMER
The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.
